A Jim of All Trades

Archive for the ‘Music’ Category

A Diddley Bow & Bottle Neck Slide

leave a comment »

For Christmas this year I made a diddley bow as a gift for my sister, her husband, and their four boys. A diddley bow is a single stringed instrument, typically played like a guitar, or a slide guitar that you would lay across your lap. You can make them as fancy or as basic as you like. Do a google search and you’ll find all kinds; some including electric pickups and intricate decoration, others as simple as a string stretched over a board.

I had never made one before and decided to do this rather last minute to give them as a gift. It took about a week to do, working a bit in the evenings, which is pretty quick for me. I figured, having only one string, it’d be easy enough for even the least musically inclined among them to be able to get some sort of tune out of. As you can see, it doesn’t have frets, so it’s best played with a slide (see further below), though you can still get notes out of it by holding the string down with your fingers. They all seemed to like it and my sister has since told me it gets picked up and played with a lot, so I’m really pleased that they enjoy it.

Here are some pics:


I think the bridge is a key for winding clocks. I found it in a bin at an antiques store a year ago.


The fret markers; I only marked the odd and 12th frets.

So they’d have a slide to use with it, I made [well, sort of] one of those too. I’ve seen bottle neck slides online and at festivals and have always wanted to try making one. I have some old wine bottles collecting dust in my basement, so gave it a go. It took me three of four tries until I was able to do it without cracking the neck, but finally got it right.

It’s a cool process, first you etch a line around the neck, then hold the neck up to the etched line in boiling water for a few minutes, then immediately move it to ice water, and, when done right, the glass cracks through along the etch line. Finally, just polish off the broken edge (I used a Dremel) and you have a slide. There are many good videos on YouTube if you’re curious enough to look.

No video of this guitar, I half forgot, half didn’t have time to do one, but it isn’t anything special, just a single stringed CBG really.

Thanks a lot for reading, happy playing!

Advertisements

Written by Jim

January 13, 2018 at 8:28 pm

Gas Can Guitar

leave a comment »

It’s been a while, but I made another guitar. This one’s a Gas Can Guitar, made out of, well, a gas can…

I saw one online a while ago, thought it was awesome, and wanted to make my own. My dad gave me the gas can a year or two ago, I found a donor guitar for the parts cheap online at the beginning of this year, and I finally got around to making it. This one was probably the easiest I’ve made so far, but I wasn’t overly motivated to do it, so it dragged on for a while.

As for play-ability, the action turned out pretty high and there’s not much I can do to lower it easily due to how it’s made. It also goes in and out of tune while playing due to the can bowing and shifting the bridge (I think). So, it’s not the best sounding or playing guitar, but still good enough to play around and have some fun with. Also, the pickup is a little on the hot side, which I like.

The back:

And here’s a pic before it was assembled, so you can see what’s inside:

And finally, here’s a short and rather sloppily played video:

Thanks as always for reading and Happy Thanksgiving!

Written by Jim

November 24, 2017 at 10:23 am

License Plate Guitar

leave a comment »

About a week ago I finished my most recent guitar build, an electric four string license plate guitar:

Having seen a number of these on YouTube, I’ve wanted to make one for a while. I actually started on it around Christmas time, but didn’t work on it for a weeks at a time due to being busy and having some life distractions.

The box is made out of poplar, the neck butternut, and the finger board is oak. I got the license plate off eBay and chose one from New York because I think it looks cool, it’s fairly unique (most license plate guitars I’ve seen use western plates), and I’m from New York state originally.

Aesthetically speaking, this is one of the favorites that I’ve made; it didn’t turn out perfect, but I’m pleased with it. Unfortunately I messed up marking the fingerboardĀ and cutting for the frets though; it doesn’t play in tune down the neck. It’s still good enough for me to use to noodle around with, but it always just sounds a bit “off” and I won’t play it for many people (not that I do much of that anyway).

This isn’t an original idea, but my favorite thing about this is the tail piece: it’s the end of a fork cut and bent for the application. It works perfectly and, in my opinion, looks pretty cool.

For pickups, there are two piezos mounted under the plate, one under either end of the bridge, and I included a volume control. The sound quality is so-so, about what you can expect for piezo pickups.

Well, thanks a lot for looking. I have another project I want to start right away, and it shouldn’t be too hard, but finding the motivation and time to do it could prove challenging.

Thanks for reading and happy playing!

Written by Jim

March 10, 2017 at 11:22 am

Wine Box Guitar

leave a comment »

After a several month hiatus over the summer, I’ve finally built another guitar: A Wine Box Guitar.

imgp0771xcss

I got the idea after seeing a video of Justin Johnson (easily my favorite CBG player) playing one sometime last year. I got the box from eBay and my wife found the guitar that I used for the other components while helping clean out a relative’s basement.

Here’s the “before” picture:

img_20160919_213919621xcs

I’m relatively please with how it turned out but there are some flaws and short comings. The wine box has really think sides (3/4″) and the top and bottom are 1/4″ thick, so it doesn’t resonate well at all. As a result, it’s very “thin” sounding and doesn’t have much volume. A larger sound hole would have helped, but I didn’t want to ruin the awesome dragon on the lid, so went with a simple f-hole. Cutting that out was the hardest most time consuming part of the process and it splintered a little around the edge.

imgp0767xss

img_20161022_105530644xs
Template I made for tracing the hole.

Otherwise the build was pretty straight forward, I just removed the bridge and neck from the guitar and put them on the wine box. I did replace the nut and tuners as well.

It is playable but due to the poor sound quality is more of a decoration than anything to me. I still think it’s neat and am pleased with it. Here are just a few more pictures and there’s a video, with some quite noticeable mistakes, at the end of me playing it.

img_20161113_103733852xcs

img_20161016_205921422xs
You can get an idea here of the thickness of the sides. This was a 2-bottle wine box, the notches in the sides were for inserts to hold the bottles in place.

img_20161017_214633306xs
The neck was glued on and reinforced with two screws.

Having nylon strings, I think playing classical music with it is most appropriate, but I’m not the best classical guitarist. Here’s the video, anyway. (It’s pretty faint, so you might have to turn up your volume)

Thanks a lot for looking, and happy playing!

Written by Jim

November 13, 2016 at 12:10 pm

Cigar Box Amplifier

with 2 comments

This is my latest project: a cigar box amplifier.

IMGP0664xs
A video is at the bottom of this post.

To be completely honest, I can’t tell you a lot about it. Electronics aren’t a strong suit of mine and I followed step by step directions to put it together. Here is a link. IĀ had seen these before at a cigar box guitar festival but, though I thought they were cool, I didn’t really think about making one. However, months ago I somehow happened upon these instructions and figured why not give it a shot.

Some of you might laugh when you see the wiring and my gobs of solder, but hey, it works! The instructions said to plan on about 4 hours to put it together; I think it took me 10. It’s a neat little amp though. It uses a 4″ speaker and the controls are volume and gain. It’s powered by a 9V battery, or a wall adapter (which I haven’t tried yet), and is wired so that it turns on automatically when an instrument cable is plugged in.

IMGP0668xs

IMGP0669xs

It behaves somewhat like a tube amp in that it breaks up a bit as you turn up the volume. I’ve also found that it responds well to guitar volume adjustments. I leave the amp pretty well cranked now and just roll off the guitar volume when I want a cleaner sound (something I didn’t include in the video). I’ve also found it to sound a bit better with single coil pickups, but that’s probably a matter of personal preference.

Below is the aforementioned video. Nothing special, but enough to get the idea.

 

Thanks a lot for reading, happy playing!

Written by Jim

May 30, 2016 at 10:20 pm

A Bedpan Guitar

leave a comment »

IMGP0566cxs

This is another guitar that I finished late in December, a bedpan guitar. I can’t take credit for the idea, just do a google search and you’ll find several others.
(more pictures at the end of the post)

The story behind this one is that my mother (a nurse with a pretty goofy sense of humor) saw a few at a festival she went to over the summer and asked if I could make her one. She thought it was funny and the bedpan reminded her of her nursing school days. It wasn’t very hard to make, it just took me a while to get to it. She was very happy with it.

I found the bedpan on Craigslist, which has to go down as my most interesting Craigslist purchase. I cleaned it so hard before doing anything with it, you can’t even imagine.

I didn’t shoot any video of it or record it, and it’s sort of hard to explain the sound. It sounds okay, but definitely different than a cigar box guitar does. Less volume (I think due to the lack of a lid and the bridge resting right on the neck) but sort of metallic-y and well suited for playing with a slide.

It was fun to do and I’m happy my mother enjoys it so much but I can’t say I’d make another.

Thanks for looking, hope you enjoyed.

IMGP0567xs IMGP0572xs IMGP0569cxs

Written by Jim

January 13, 2016 at 9:51 pm

Cookie Tin Guitar

with 2 comments

I’ve made a few more guitars since the last one I posted about in June. One that I completed in December is a cookie tin guitar.

IMGP0561xs

It’s the same general concept as a cigar box guitar, but with a cookie tin as a resonator instead of a box. While I was making it my intention was to try to sell it to help finance another project I want to do, but after I finished and played it, I liked it too much so am not going to part with it. This just reinforces my original feelings that I’d never make these to sell… it takes away some of the fun in making them, actually making it sort of stressful with being concerned over details, and it’s just more fun to do it as a hobby and give them as gifts.

Anyway, this one does have a unique sound to it; it’s a bit more “plucky” and banjo like. Following are some photos and a short video of me playing it at the end.

IMGP0541xcs IMGP0538xs IMGP0542xs IMGP0539xs

Thanks for looking!

Written by Jim

January 2, 2016 at 10:08 am